Description
Our ST3301 Series LED Light Bar was designed to offer a high volume of light in the mid-range, with excellent visibility on the road shoulders. Compared to bars like our ST4K & ST3K (which have a longer beam distance but slightly less brightness in comparison) our ST3301 forms a larger diameter spot that blends homogeneously with its wide beam. Perfectly suits the customer concerned about wildlife running out from the road shoulders or those who need a huge amount of brightness and coverage in the mid short and mid-range.
OVERVIEW
Re-structured from our popular ST3300 comes the new STEDI ST3301 with a new look and improved lighting technology alongside revised reflectors increasing the performance dramatically.
PERFORMANCE
The ST3301 is packing a lot more punch than its predecessor when it comes to the penetration of light reaching 450m at the 1 Lux mark. With this increase of light we also managed to chop down the weight with the 20″ Bar only weighing in at 2.685kg.
BEAM CHARACTERISTICS
The beam of our ST3301 runs very close to that of the ST4K & ST3K, providing a very similar beam pattern but with its higher Lumen output producing a more intense light.
KEY TECHNICAL BREAKDOWN
- Ingress Protection IP68 (Backed by certificate of conformity),
- Coordinated Colour Temperature 5500K – Excellent colour contrast.
- Flood/spot/flood combination with 12 x CREE XM-L2 LEDs
- 2 Flood + 8 Spot + 2 Flood Reflector Distribution
- Tough GE Lexan primary lens which 250 times the impact-resistant strength of glass and 30 times stronger than acrylic Polycarbonate.
- Waterproof Deutsch DT Connector
- Adjustable Slide mounts and stainless steel side brackets included.
- Guaranteed against electromagnetic (EMC) and radio frequency (RFI) interference
We are so confident you will love this product, price, quality, and performance, we are offering a FULL 5 YEAR WARRANTY
SPECIFICATIONS
| LUMEN | 12,642Lm |
| PEAK INTENSITY (CANDELA) | 152,400cd |
| OPERATING VOLTAGE | 10-45V DC |
| WATERPROOF RATE | IP 68 |
| LED | 12 x CREE™ XM-L2 |
| COORDINATED COLOUR TEMPERATURE | 5500K |
| MATERIAL | Die-Cast Aluminium |
| LENS | GE Lexan |
| MOUNTING BRACKET | 4mm Stainless Steel |
| BOLTS AND FITTINGS | 3 Series Stainless Steel |
| FLOOD BEAM ANGLE | 45° Degrees |
| SPOT BEAM ANGLE | 11° Degrees |
| LIFE SPAN | 50000 Hours |
| WEIGHT | 2.115kg |
| CURRENT DRAW | 5.8A @ 13.6v |
- ST3301 18.6 INCH 12 LED LIGHT BAR
- Stainless Bolt and Nut Set
- 2 x Adjustable Sliding Lower Mounting Brackets + Stainless Steel Side Brackets
- Quick-Fit High Beam Wiring Harness 12v Relay, Wiring Kit and On/Off Switch
- HB3 and H4 Piggy Back Adaptors
Reviews
There are no reviews yet.