Xtreme Outback Stage 1 Heavy Duty Organic Clutch Kit for Chevrolet Blazer, Chevrolet C30 – 300mm

Xtreme Outback heavy duty organic clutch kit for the vehicle and transmission variants listed below. The organic friction design suits drivers seeking a heavy duty clutch upgrade for regular driving, towing and off-road use, subject to the specified application and torque limits.

Technical specifications

Brand	Xtreme Outback
Manufacturer part number	KCR31001-1A
Product	Clutch Kit
Stage	Stage 1
Construction / duty	Heavy Duty; Organic
Flywheel step	0
Clutch disc diameter (mm)	300
Disc spline count	10
Disc spline diameter (mm)	28,6
Clutch design	Single Plate
Supplier shipping weight (kg)	12.50

Kit selection

Check the listed flywheel compatibility and vehicle restrictions when selecting this clutch kit. Confirm application-specific bearing and hydraulic requirements before fitting.

Vehicle fitment

Fits only the variants and restrictions shown below. Model names and years alone are not enough: check the engine, gearbox, spline specification and any conversion requirements against the vehicle before ordering.

Make	Model / series	Variant	Years	Engine / application detail	Gearbox / fitting restrictions
Chevrolet	Blazer	4.3	1994.09-2005.09	L35(262CUL6) 4300 Petrol 142 kW 193 BHP (1994.09 – 2005.09)
Chevrolet	Blazer	4.3 AWD	1994.09-2005.09	LU3, L35(262CUL6) 4300 Petrol 142 kW 193 BHP (1994.09 – 2005.09)
Chevrolet	Blazer	4.3 V6 AWD	1994.01-2005.09	L35(262CUL6) 4300 Petrol 142 kW 193 BHP (1994.01 – 2005.09)
Chevrolet	C30	4.8	1974.09-1986.12	L25 4765 Petrol 86 kW 117 BHP (1974.09 – 1986.12)
Chevrolet	C30	5.7	1981.09-1984.12	LS9(350CUV8) 5733 Petrol 123 kW 167 BHP (1981.09 – 1984.12)

How to Bed-In a Clutch

Bedding-In a new clutch is vital to ensure that the clutch operates effectively and to help long-term durability.

Failure to correctly bed-in the new clutch can cause a wide range of clutch failures including shudder, therefore it is critical to take the time to complete this process.

TIPS FOR BEDDING-IN YOUR NEW CLUTCH

• Drive the Vehicle Gently for the first 1000 km
• Avoid Launching the Vehicle Aggressively
• Low RPM Engagements in Stop Start Traffic are Best for Bedding-In the Friction Material

CERAMIC MOTORSPORT APPLICATIONS

In Motorsport applications where street driving is not possible, it is important that a progressive degree of mechanical sympathy is used to assist with bedding-in the friction material to the steel surfaces. It is recommended that the friction point is modulated around a workshop and pit area at low engine RPM as much as possible. If the vehicle is being used in an event it is important to use warmup sessions to progressively increase the aggressiveness of driving. Being too aggressive with the clutch too soon after installation can cause slipping, localised thermal overloading and result in welding of the friction material.

DO YOU HAVE A SINGLE-MASS FLYWHEEL CONVERSION KIT?

When fitting a single mass flywheel replacement clutch package in certain vehicles, there may be an increase in transferred harmonic noises from the engine to the gearbox. This may present itself as increased rollover noise from the transmission at idle or increased harmonics in labouring conditions. These transmitted noises in no way effect the performance of the clutch or vehicle. Whilst every effort is made to reduce these harmonics by design, in some cases additional harmonics are unavoidable.

* Please note that these noises are not a warrantable issue.

DNA4x4 on YouTube

Explore our builds, product videos and workshop updates. Watch DNA4x4 on YouTube.