Nissan Navara NP300 Pedders Heavy Duty Load Carrying & Towing Kit with Fully Assembled Front Suspension

Description

Nissan Navara NP300 Pedders Heavy Duty Load Carrying & Towing Kit with Fully Assembled Front Suspension

Upgrade the ride height, load support and suspension control of your pickup with this complete Nissan Navara NP300 suspension kit from Pedders.

Designed for the Nissan Navara D23, also known as the NP300, this full front and rear suspension package combines two fully assembled Pedders TrakRyder Ezi-Fit front struts with a  Towing rear suspension setup.

The kit is ideal for Navara owners who tow trailers, caravans or work equipment, carry moderate loads or need improved suspension performance without creating an excessively harsh ride when the vehicle is empty.

Complete Front and Rear Suspension Upgrade

This kit provides a complete suspension solution for both the front and rear of the Nissan Navara NP300.

The front suspension is supplied as two fully assembled Pedders TrakRyder Ezi-Fit units. Each assembly includes a matched foam-cell shock absorber, coil spring and upper strut mount.

The rear suspension uses uprated progressive springs designed to provide additional support when towing or carrying moderate loads while retaining comfort during normal unladen driving.

By matching the front and rear suspension components, the kit helps create a balanced upgrade rather than simply raising one end of the vehicle.

Kit Includes

• Two fully assembled Pedders TrakRyder Ezi-Fit front struts
• Pedders TrakRyder foam-cell front shock absorbers
• Matched front coil springs
• New upper front strut mounts
• Heavy Duty Load Carrying & Towing rear suspension package
• Uprated progressive rear springs
• Matched suspension components for the Nissan Navara D23 NP300
• Raised-height suspension configuration
• Professional installation available from DNA4x4

Package contents may vary according to the vehicle’s year, model and selected suspension specification. Please check the confirmed kit contents before ordering.

Fully Assembled Pedders TrakRyder Ezi-Fit Front Struts

The front of the kit includes two complete Pedders TrakRyder Ezi-Fit Spring and Shock assemblies.

These units are designed, developed and manufactured to provide precise suspension control without compromising everyday ride comfort.

Each front strut is supplied fully assembled with:

• TrakRyder foam-cell shock absorber
• Matched coil spring
• Upper strut mount
• Application-specific suspension components

Because the units arrive assembled and ready for installation, there is no need to dismantle the original struts or transfer the old springs and mounts.

This helps reduce installation time while ensuring the spring, shock absorber and mounting components are correctly matched.

Direct-Fit Suspension Assemblies

The Pedders Ezi-Fit front suspension units are designed for direct fitment to the compatible Nissan Navara NP300.

Supplying the front struts as complete assemblies offers several advantages:

• Reduced installation time
• No spring compressor required during assembly
• No need to reuse tired original strut mounts
• Correctly matched springs and dampers
• Improved installation consistency
• Reduced risk of incorrectly assembled components
• Ready for professional direct fitment

This makes the kit an excellent option for workshops, experienced installers and customers choosing professional installation at DNA4x4.

Pedders Foam-Cell Shock Absorber Technology

The TrakRyder front struts use Pedders foam-cell shock absorber technology.

This design uses a large internal oil capacity and increased cooling area to help control operating temperatures during demanding driving conditions.

The foam-cell construction helps reduce the mixing of air and oil inside the shock absorber. This supports consistent damping performance during long journeys, towing, off-road driving and repeated suspension movement.

The front dampers are designed to provide dependable control across a range of conditions, including:

• Everyday commuting
• Motorway driving
• Towing
• Touring
• Rough roads
• Gravel tracks
• Off-road terrain
• Moderately loaded vehicle use

Heavy Duty Load Carrying & Towing Rear Suspension

The rear suspension is designed for Navaras used for towing and moderate load carrying.

It uses uprated progressive springs that provide additional support as weight is added to the rear of the vehicle.

Unlike an extremely firm constant-load spring, the progressive design helps retain a more comfortable ride when the pickup bed is empty or only lightly loaded.

As the rear suspension compresses under load, the spring rate increases to provide greater support and control.

This makes the kit suitable for mixed-use vehicles that may tow or carry equipment at weekends but are still used unladen for everyday driving.

Suitable for Towing

The Heavy Duty Load Carrying & Towing rear suspension helps support the additional weight placed on the rear axle when towing.

This can help reduce:

• Excessive rear suspension sag
• Uncontrolled body movement
• Poor stability over uneven roads
• Excessive pitching
• Reduced suspension control
• An unsettled or wallowing ride

The suspension upgrade does not increase the manufacturer’s legal towing capacity, axle limits, payload or gross vehicle weight.

All loads must remain within the original vehicle manufacturer’s stated limits.

Suitable for Moderate Load Carrying

This kit is designed for vehicles that operate unladen or moderately laden.

Typical applications may include:

• Occasional tools and equipment
• Towing trailers or caravans
• Camping equipment
• Touring equipment
• Light recovery equipment
• Moderate pickup-bed loads
• Weekend work use
• Mixed road and off-road driving

The rear springs are not intended for vehicles carrying an extremely heavy permanent load at all times.

A Navara fitted with a heavy canopy, drawer system, water tank, auxiliary fuel tank or permanently installed work equipment may require a different constant-load spring specification.

DNA4x4 can help select the correct suspension setup based on the vehicle’s permanent accessory weight and normal operating load.

Raised Suspension Height

The raised suspension configuration provides an approximate increase of around 30–35mm, or approximately 1.5 inches, depending on the vehicle and selected components.

The additional ride height can help provide:

• Improved ground clearance
• Increased clearance over rough tracks
• A more purposeful vehicle stance
• Improved approach over uneven terrain
• Greater suspension travel compared with tired original components
• Improved support when the vehicle is loaded

The final measured increase can vary depending on the condition of the original suspension, vehicle weight, engine specification and fitted accessories.

Improved Ride and Handling

Worn original suspension can cause poor handling, reduced ride height and excessive body movement.

Replacing the original components with a matched Pedders suspension package can help improve:

• Steering response
• Braking stability
• Body control
• Ride-height consistency
• Suspension recovery over bumps
• Stability while towing
• Control on rough surfaces
• Overall driver confidence

The suspension is designed to offer greater capability without making the Navara unnecessarily uncomfortable during normal road use.

Advanced Durability

The Pedders TrakRyder Ezi-Fit front struts are designed for dependable performance across demanding driving conditions.

The foam-cell shock absorbers feature a large cooling area for improved oil contact and temperature management.

The assemblies also use durable mounting components, including a bridged ferrule mounting bush where applicable, to help provide secure and consistent suspension operation.

This makes the kit suitable for drivers who expect more from their Navara than a standard road-only suspension setup.

Ideal Applications

This complete Pedders suspension kit is suitable for:

• Daily-driven Nissan Navara NP300 models
• Tow vehicles
• Touring and camping builds
• Vehicles carrying moderate loads
• Work and leisure pickups
• Vehicles driven on rough roads
• Light and moderate off-road use
• Owners replacing tired original suspension
• Drivers wanting increased ride height
• Mixed-use vehicles that regularly travel unladen

Key Features and Benefits

• Complete front and rear suspension kit
• Designed for the Nissan Navara D23 NP300
• Heavy Duty Load Carrying & Towing specification
• Two fully assembled front struts
• Pedders TrakRyder foam-cell front shock absorbers
• Matched front springs and upper mounts
• Direct-fit front suspension assemblies
• No spring compressor needed to assemble the front struts
• Uprated progressive rear springs
• Suitable for towing and moderate load carrying
• Retains comfort when driven unladen
• Approximately 30–35mm raised ride height
• Improved suspension control
• Improved ground clearance
• Professional installation available from DNA4x4

Vehicle Compatibility

Designed for selected:

• Nissan Navara D23
• Nissan Navara NP300
• Double Cab models, subject to application
• Selected model years and engine configurations

Compatibility can vary depending on the vehicle’s year, engine, body style, axle weight and existing accessories.

Please provide your vehicle registration number when ordering. The DNA4x4 team can check the application and confirm whether this Heavy Duty Load Carrying & Towing setup is suitable for your Navara.

Professional Installation at DNA4x4

DNA4x4 supplies and professionally installs Pedders suspension kits at our specialist 4×4 workshop in Newton Aycliffe.

Our team can inspect your vehicle, discuss how it is normally used and confirm whether the selected spring and load rating are suitable.

Professional installation can include:

• Removal of the original front struts
• Direct installation of the assembled Pedders front units
• Installation of the rear suspension components
• Inspection of suspension bushes and mounting points
• Ride-height measurements
• Fastener torque checks
• Wheel alignment
• Post-installation road testing
• Suspension and load-carrying advice

A professional wheel alignment is strongly recommended after installing raised front suspension components.

Why Choose DNA4x4?

DNA4x4 specialises in suspension, towing, touring and off-road upgrades for pickup trucks and 4×4 vehicles.

We work closely with leading manufacturers and suppliers to provide suspension packages matched to the vehicle’s actual use.

When purchasing this Pedders kit from DNA4x4, you receive:

• Specialist 4×4 suspension advice
• Vehicle-specific fitment support
• Help selecting the correct spring rate
• Professional workshop installation
• Towing and load-carrying guidance
• Support for complete touring and off-road builds
• Advice from an experienced UK 4×4 specialist

Frequently Asked Questions

Is this a complete front and rear suspension kit?

Yes. This kit is designed as a complete suspension package for the front and rear of the Nissan Navara NP300.

It includes two fully assembled front suspension units and a Heavy Duty Load Carrying & Towing rear suspension setup.

How many front struts are included?

The kit includes two fully assembled Pedders TrakRyder Ezi-Fit front struts, covering both the left and right sides of the vehicle.

What is included in each assembled front strut?

Each Ezi-Fit front unit includes a Pedders TrakRyder foam-cell shock absorber, matched coil spring and upper strut mount.

Do the front struts need assembling?

No. The front units are supplied fully assembled and ready for direct installation.

This removes the need to transfer the original springs or use a spring compressor to build the struts.

How much will the kit raise my Navara?

The kit is designed to provide an approximate increase of around 30–35mm, or approximately 1.5 inches.

The exact measured increase will depend on the vehicle’s weight, accessories and original suspension condition.

Is this kit suitable for towing?

Yes. The rear suspension is designed to provide improved support and control for vehicles used for towing.

The original vehicle towing limits and axle ratings must still be followed.

Will it remain comfortable when the vehicle is empty?

The progressive rear spring design helps retain comfort when the Navara is unladen while providing increased support as weight is added.

Is it suitable for a permanently heavy vehicle?

This kit is best suited to vehicles that operate unladen or moderately laden.

Vehicles carrying substantial permanent weight may require a different constant-load rear spring specification.

Will this kit increase my legal payload?

No. The suspension can improve ride height, support and control, but it does not automatically increase the manufacturer’s legal payload, axle limits or gross vehicle weight.

Do I need a wheel alignment after installation?

Yes. A full wheel alignment is recommended after installing raised or replacement front suspension.

Can DNA4x4 install this kit?

Yes. DNA4x4 offers professional Pedders suspension installation at our Newton Aycliffe workshop.

Contact the team with your registration number, fitted accessories and usual towing or load requirements for a tailored quotation.