ACS Ductile Cast Iron Flywheel for Toyota Hilux, Toyota Land Cruiser 90

ACS ductile cast iron flywheel for the vehicle and transmission variants listed below. Supplied as a flywheel component; match the clutch, crank mounting and flywheel specification before ordering.

Technical specifications

Brand	ACS
Manufacturer part number	FTY147DI
Product	Flywheel
Construction / duty	Ductile Cast Iron
Flywheel step (mm)	-4.2
Ring gear tooth count	110
Flywheel mounting holes	8
Flywheel mounting hole diameter (mm)	13.2
Flywheel type	Single Mass
Material	Ductile Cast Iron
Supplier shipping weight (kg)	19.80

Vehicle fitment

Fits only the variants and restrictions shown below. Model names and years alone are not enough: check the engine, gearbox, spline specification and any conversion requirements against the vehicle before ordering.

Make	Model / series	Variant	Years	Engine / application detail	Gearbox / fitting restrictions
Toyota	Hilux / Gen. VII	2.5 D-4D 4WD (KUN15)	2005.08-2006.10	2KD-FTV 2494 Diesel 65 KW 88 BHP (2005.08 – 2006.10)
Toyota	Hilux / Gen. VII	2.5 D-4D 4WD (KUN25)	2005.03-2015.05	2KD-FTV 2494 Diesel 75 KW 102 BHP (2005.03 – 2015.05)
Toyota	Hilux / Gen. VII	2.5 D-4D 4WD (KUN15, KUN10)	2005.03-2015.05	2KD-FTV 2494 Diesel 75 KW 102 BHP (2005.03 – 2015.05)
Toyota	Hilux / Gen. VII	2.5 D-4D 4WD (KUN15)	2005.06-2015.05	2KD-FTV 2494 Diesel 88 KW 120 BHP (2005.06 – 2015.05)
Toyota	Hilux / Gen. VII	2.5 D-4D 4WD (KUN25_, KUN25R)	2006.06-2015.05	2KD-FTV 2494 Diesel 88 KW 120 BHP (2006.06 – 2015.05)
Toyota	Hilux / Gen. VII	2.5 D-4D 4WD (KUN25)	2007.12-2015.05	2KD-FTV 2494 Diesel 106 KW 144 BHP (2007.12 – 2015.05)
Toyota	Land Cruiser 90	3.0 D-4D 4WD (KDJ90_. KDJ95_)	2000.08-2002.08	1KD-FTV 2982 Diesel 120 kW 163 BHP (2000.08 – 2002.08)

How to Bed-In a Clutch

Bedding-In a new clutch is vital to ensure that the clutch operates effectively and to help long-term durability.

Failure to correctly bed-in the new clutch can cause a wide range of clutch failures including shudder, therefore it is critical to take the time to complete this process.

TIPS FOR BEDDING-IN YOUR NEW CLUTCH

• Drive the Vehicle Gently for the first 1000 km
• Avoid Launching the Vehicle Aggressively
• Low RPM Engagements in Stop Start Traffic are Best for Bedding-In the Friction Material

CERAMIC MOTORSPORT APPLICATIONS

In Motorsport applications where street driving is not possible, it is important that a progressive degree of mechanical sympathy is used to assist with bedding-in the friction material to the steel surfaces. It is recommended that the friction point is modulated around a workshop and pit area at low engine RPM as much as possible. If the vehicle is being used in an event it is important to use warmup sessions to progressively increase the aggressiveness of driving. Being too aggressive with the clutch too soon after installation can cause slipping, localised thermal overloading and result in welding of the friction material.

DO YOU HAVE A SINGLE-MASS FLYWHEEL CONVERSION KIT?

When fitting a single mass flywheel replacement clutch package in certain vehicles, there may be an increase in transferred harmonic noises from the engine to the gearbox. This may present itself as increased rollover noise from the transmission at idle or increased harmonics in labouring conditions. These transmitted noises in no way effect the performance of the clutch or vehicle. Whilst every effort is made to reduce these harmonics by design, in some cases additional harmonics are unavoidable.

* Please note that these noises are not a warrantable issue.

DNA4x4 on YouTube

Explore our builds, product videos and workshop updates. Watch DNA4x4 on YouTube.