Pedders Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger, PX Ford Ranger PX, 4WD 2011-2015

Pedders Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger, PX Ford Ranger PX, 4WD 2011-2015

The Pedders Heavy Duty Load Carrying and Towing Suspension Kit is designed specifically for the Ford Ranger PX 4WD models from 2011 to 2015. It raises the vehicle by approximately 40mm, improving ground clearance and supporting load carrying and towing needs while maintaining ride comfort similar to the standard setup.

Quick Product Summary

This Pedders suspension kit raises Ford Ranger PX 40mm to enhance load carrying and towing with Foam Cell shocks and springs.

Key Product Details

• Product: Pedders Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger, PX Ford Ranger PX, 4WD 2011-2015
• Brand: Pedders
• Part Type: Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger, PX
• Vehicle Fitment: Ford Ranger PX, 4WD 2011-2015
• SKU: 803118-FMFI
• Category: SUSPENSION KITS
• Group: Kits
• Focus Keyword: Pedders Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger PX Ford Ranger
• Warranty: Pedders products purchased through DNA4x4 are backed by a 3 year warranty.

Why Choose This Product?

This kit includes front coil springs, new rear leaf springs, and Pedders TrakRyder Foam Cell shock absorbers with sintered iron pistons and a large 40mm bore, which provide stable damping forces and resist fade under load. The 40mm lift allows for larger tyres and better ground clearance, helping to reduce rear sag when carrying loads or towing. Fully assembled Ezifit struts and included hardware enable a quick installation without the need for spring compressors or reusing old parts.

• Recommended: Wheel alignment after installation
• Includes: Front coil springs, rear leaf springs, bushes, U-bolts, fully assembled Ezifit struts
• Shock type: Sintered iron piston with 40mm bore
• Rear height: Approx. 40mm higher than standard
• Front height: 840mm with 17-inch wheels
• Vehicle lift: Approx. 40mm raise

Vehicle Compatibility

Suitable for Ford Ranger PX 4WD vehicles from 2011 to 2015, this suspension kit is ideal for those who regularly carry standard loads or tow with their vehicle and experience rear sag when unladen. It is not intended for continuous heavy load use and may require consultation if the vehicle has additional front equipment such as winches or bull bars to ensure correct spring selection.

• Make: Ford
• Model: Ranger
• Variant: PX, 4WD
• Year Range: 2011-2015

Fitment Check Before Ordering

Before ordering, compare the vehicle details below with your own vehicle. This helps avoid confusion where multiple trims, drivetrains or year ranges exist.

• Check SKU / Item: 803118-FMFI
• Check Make: Ford
• Check Model: Ranger
• Check Variant: PX, 4WD
• Check Year Range: 2011-2015

When Is This Part Needed?

Buy this Pedders suspension kit when you need to maintain correct suspension control while carrying or towing standard loads with your Ford Ranger PX. It is especially useful if your vehicle sags at the rear under load or if you want to increase ground clearance for larger tyres and improved clearance. The kit’s Foam Cell shocks and upgraded springs help support correct suspension function during typical load and towing conditions.

Technical Details

• Brand: Pedders
• SKU: 803118-FMFI
• Product Type: Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger, PX
• Vehicle: Ford Ranger PX, 4WD 2011-2015
• Make: Ford
• Model: Ranger
• Variant: PX, 4WD
• Year Range: 2011-2015
• Weight: 99.96
• Parameter#1: Height: approx. +40mm
• Parameter#2: Minimum weight required: None

Product Information

This suspension kit is designed for Ford Ranger PX owners who require enhanced load carrying and towing capacity. It raises the vehicle around 40mm to improve ground clearance and offers comfort and handling comparable to the standard setup.

This kit includes front coil springs, new rear leaf springs, and Pedders TrakRyder Foam Cell shocks designed to handle load and towing conditions without sacrificing ride comfort. It is suitable for users who experience rear sag under load but operate their Ranger unladen. The 40mm lift improves ground clearance and accommodates larger tyres, enhancing both appearance and off-road ability. Users with additional front equipment, like winches or bull bars, should consult to ensure correct spring selection. This is a first-level heavy-duty suspension solution balancing durability with on-road comfort.

Foam Cell shock absorbers use a special foam saturated with oil instead of relying on pressurised gas. This design prevents aeration and cavitation, keeping damping forces stable across the full stroke. With greater oil capacity and improved heat dissipation, they resist fade, control temperature, and deliver reliable performance even under demanding use. Their durability makes them well suited for heavy-duty, towing and off-road applications.

The kit includes fully assembled Ezifit struts with Pedders Foam Cell shocks, springs, new top mounts, bump stops, and boots, allowing quick installation without spring compressors or reusing old parts. No other vehicle modifications are needed. A professional wheel alignment is strongly recommended after installation to ensure optimal performance.

This kit is suitable for standard load carrying and towing conditions, not intended for continuous heavy load usage.

Supplier Listed Features

• 1.75 inch lift (approx. 40mm vehicle raise)
• Improved load carrying and towing capability
• Increased off-road ground clearance
• Sintered iron piston shocks with large 40mm bore
• grade steel coil springs
• Vehicle lift: Approx. 40mm raise
• Front height: 840mm with 17-inch wheels
• Rear height: Approx. 40mm higher than standard
• Shock type: Sintered iron piston with 40mm bore
• Includes: Front coil springs, rear leaf springs, bushes, U-bolts, fully assembled Ezifit struts

Warranty and Support

Pedders products purchased through DNA4x4 are backed by a 3 year warranty.

Need help confirming fitment? Contact DNA4x4 before ordering and we can help check the part against your vehicle details.

Helpful Links

Browse more DNA4x4 suspension parts or see product, installation and build content on the DNA4x4 YouTube channel.

Pedders Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger PX Ford Ranger FAQs

Will this suspension kit fit my Ford Ranger PX 4WD from 2013?
Yes, this Pedders suspension kit is compatible with Ford Ranger PX 4WD models from 2011 to 2015, including 2013.

Does this kit require any vehicle modifications for installation?
No vehicle modifications are required; the kit includes fully assembled Ezifit struts and all necessary hardware for a straightforward installation.

Is this suspension kit suitable for continuous heavy load towing?
This kit is designed for standard load carrying and towing conditions and is not intended for continuous heavy load use.

Do Pedders parts bought from DNA4x4 include a warranty?
Pedders products purchased through DNA4x4 are backed by a 3 year warranty.

Shop with confidence at DNA4x4 for vehicle-specific Pedders parts, practical advice, a 3 year Pedders warranty when purchased through DNA4x4, and support for Ford Ranger PX, 4WD 2011-2015.