Description
Pedders Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger, PX Ford Ranger PX MK2, 4WD 2015-2018
The Pedders Heavy Duty Load Carrying and Towing Suspension Kit is designed specifically for the Ford Ranger PX MK2 4WD models from 2015 to 2018. It raises the vehicle by around 40mm, improving ground clearance and supporting enhanced load and towing demands without compromising on-road comfort.
Quick Product Summary
This Pedders suspension kit raises the Ford Ranger PX MK2 by approximately 40mm to enhance load carrying and towing capability while maintaining ride comfort.
Key Product Details
- Product: Pedders Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger, PX Ford Ranger PX MK2, 4WD 2015-2018
- Brand: Pedders
- Part Type: Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger, PX
- Vehicle Fitment: Ford Ranger PX MK2, 4WD 2015-2018
- SKU: 803118-G6GY
- Category: SUSPENSION KITS
- Group: Kits
- Focus Keyword: Pedders Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger PX Ford Ranger
- Warranty: Pedders products purchased through DNA4x4 are backed by a 3 year warranty.
Why Choose This Product?
This suspension kit includes front coil springs, rear leaf springs, and Pedders Foam Cell shocks featuring sintered iron pistons with a 40mm bore for stable damping under load. The 40mm lift helps reduce rear sag when towing or carrying loads and allows fitting of larger tyres. Fully assembled Ezifit struts and included new top mounts, bump stops, and boots simplify installation without the need for spring compressors or vehicle modifications. A professional wheel alignment is recommended after fitting.
- Recommended: Wheel alignment after installation
- Includes: Front coil springs, rear leaf springs, bushes, U-bolts, fully assembled Ezifit struts
- Shock type: Sintered iron piston with 40mm bore
- Rear height: Approx. 40mm higher than standard
- Front height: 840mm with 17-inch wheels
- Vehicle lift: Approx. 40mm raise
Vehicle Compatibility
Suitable for Ford Ranger PX MK2 4WD models from 2015 to 2018, this kit is ideal for owners who require improved suspension support when towing or carrying standard loads. It is not intended for continuous heavy load use and may require consultation if additional front accessories such as winches or bull bars are fitted to ensure correct spring selection.
- Make: Ford
- Model: Ranger
- Variant: PX MK2, 4WD
- Year Range: 2015-2018
Fitment Check Before Ordering
Before ordering, compare the vehicle details below with your own vehicle. This helps avoid confusion where multiple trims, drivetrains or year ranges exist.
- Check SKU / Item: 803118-G6GY
- Check Make: Ford
- Check Model: Ranger
- Check Variant: PX MK2, 4WD
- Check Year Range: 2015-2018
When Is This Part Needed?
Choose this Pedders suspension kit when your Ford Ranger PX MK2 experiences rear sag under load or towing, or if you want increased ground clearance and the ability to fit larger tyres. It is a practical solution to maintain suspension control and durability for enhanced load carrying and towing situations, while preserving ride comfort on road.
Technical Details
- Brand: Pedders
- SKU: 803118-G6GY
- Product Type: Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger, PX
- Vehicle: Ford Ranger PX MK2, 4WD 2015-2018
- Make: Ford
- Model: Ranger
- Variant: PX MK2, 4WD
- Year Range: 2015-2018
- Weight: 99.96
- Parameter#1: Height: approx. +40mm
- Parameter#2: Minimum weight required: None
Product Information
This suspension kit is designed for Ford Ranger PX owners who require enhanced load carrying and towing capacity. It raises the vehicle around 40mm to improve ground clearance and offers comfort and handling comparable to the standard setup.
This kit includes front coil springs, new rear leaf springs, and Pedders TrakRyder Foam Cell shocks designed to handle load and towing conditions without sacrificing ride comfort. It is suitable for users who experience rear sag under load but operate their Ranger unladen. The 40mm lift improves ground clearance and accommodates larger tyres, enhancing both appearance and off-road ability. Users with additional front equipment, like winches or bull bars, should consult to ensure correct spring selection. This is a first-level heavy-duty suspension solution balancing durability with on-road comfort.
Foam Cell shock absorbers use a special foam saturated with oil instead of relying on pressurised gas. This design prevents aeration and cavitation, keeping damping forces stable across the full stroke. With greater oil capacity and improved heat dissipation, they resist fade, control temperature, and deliver reliable performance even under demanding use. Their durability makes them well suited for heavy-duty, towing and off-road applications.
The kit includes fully assembled Ezifit struts with Pedders Foam Cell shocks, springs, new top mounts, bump stops, and boots, allowing quick installation without spring compressors or reusing old parts. No other vehicle modifications are needed. A professional wheel alignment is strongly recommended after installation to ensure optimal performance.
This kit is suitable for standard load carrying and towing conditions, not intended for continuous heavy load usage.
Supplier Listed Features
- 1.75 inch lift (approx. 40mm vehicle raise)
- Improved load carrying and towing capability
- Increased off-road ground clearance
- Sintered iron piston shocks with large 40mm bore
- grade steel coil springs
- Vehicle lift: Approx. 40mm raise
- Front height: 840mm with 17-inch wheels
- Rear height: Approx. 40mm higher than standard
- Shock type: Sintered iron piston with 40mm bore
- Includes: Front coil springs, rear leaf springs, bushes, U-bolts, fully assembled Ezifit struts
Warranty and Support
Pedders products purchased through DNA4x4 are backed by a 3 year warranty.
Need help confirming fitment? Contact DNA4x4 before ordering and we can help check the part against your vehicle details.
Helpful Links
Browse more DNA4x4 suspension parts or see product, installation and build content on the DNA4x4 YouTube channel.
Pedders Heavy Duty Load Carrying and Towing Suspension Kit. Ford Ranger PX Ford Ranger FAQs
Will this suspension kit fit my Ford Ranger PX MK2 4WD?
Yes, this Pedders suspension kit is designed specifically for Ford Ranger PX MK2 4WD models from 2015 to 2018.
Does this kit require additional modifications to my vehicle?
No other vehicle modifications are needed, but a professional wheel alignment is strongly recommended after installation.
Can I use this kit for heavy continuous towing loads?
This kit is suitable for standard load carrying and towing conditions but is not intended for continuous heavy load usage.
Do Pedders parts bought from DNA4x4 include a warranty?
Pedders products purchased through DNA4x4 are backed by a 3 year warranty.
Shop with confidence at DNA4x4 for vehicle-specific Pedders parts, practical advice, a 3 year Pedders warranty when purchased through DNA4x4, and support for Ford Ranger PX MK2, 4WD 2015-2018.
Reviews
There are no reviews yet.