Xtreme Outback Stage 1X Extra Heavy Duty Organic Clutch Kit for Nissan Patrol – 240mm

Xtreme Outback extra heavy duty organic clutch kit for the vehicle and transmission variants listed below. The organic friction design suits drivers seeking a heavy duty clutch upgrade for regular driving, towing and off-road use, subject to the specified application and torque limits.

Technical specifications

Brand	Xtreme Outback
Manufacturer part number	KNI24008-1AX
Product	Clutch Kit
Stage	Stage 1X
Construction / duty	Extra Heavy Duty; Organic
Supplier-stated torque rating	490 Nm
Supplier-stated clamping load	1250Kg
Flywheel step (mm)	Flat
Clutch disc diameter (mm)	240
Disc spline count	24
Disc spline diameter (mm)	25,4
Clutch design	Single Plate Sprung Organic Disc – smooth engagement, excellent clutch control and improved drivability for off-road, towing and heavy-duty use.
Flywheel compatibility / inclusion	Not included
Supplier shipping weight (kg)	8.98

The clamping load describes the clutch pressure plate specification. It is not a vehicle payload, gross vehicle mass or towing rating.

Listed kit contents

• Pressure plate
• Clutch disc
• Release bearing
• Alignment tool
• Spigot bush

Contents are application specific. Use the list above when checking flywheel, bearing and hydraulic requirements.

Vehicle fitment

Fits only the variants and restrictions shown below. Model names and years alone are not enough: check the engine, gearbox, spline specification and any conversion requirements against the vehicle before ordering.

Make	Model / series	Variant	Years	Engine / application detail	Gearbox / fitting restrictions
Nissan	Patrol / Y61	2.8 TDiC	1997.10-2000.02	RD28Ti 2826 Diesel 96 kW 131 BHP (1997.10 – 2000.02) , Suitable to dual mass flywheel

How to Bed-In a Clutch

Bedding-In a new clutch is vital to ensure that the clutch operates effectively and to help long-term durability.

Failure to correctly bed-in the new clutch can cause a wide range of clutch failures including shudder, therefore it is critical to take the time to complete this process.

TIPS FOR BEDDING-IN YOUR NEW CLUTCH

• Drive the Vehicle Gently for the first 1000 km
• Avoid Launching the Vehicle Aggressively
• Low RPM Engagements in Stop Start Traffic are Best for Bedding-In the Friction Material

CERAMIC MOTORSPORT APPLICATIONS

In Motorsport applications where street driving is not possible, it is important that a progressive degree of mechanical sympathy is used to assist with bedding-in the friction material to the steel surfaces. It is recommended that the friction point is modulated around a workshop and pit area at low engine RPM as much as possible. If the vehicle is being used in an event it is important to use warmup sessions to progressively increase the aggressiveness of driving. Being too aggressive with the clutch too soon after installation can cause slipping, localised thermal overloading and result in welding of the friction material.

DO YOU HAVE A SINGLE-MASS FLYWHEEL CONVERSION KIT?

When fitting a single mass flywheel replacement clutch package in certain vehicles, there may be an increase in transferred harmonic noises from the engine to the gearbox. This may present itself as increased rollover noise from the transmission at idle or increased harmonics in labouring conditions. These transmitted noises in no way effect the performance of the clutch or vehicle. Whilst every effort is made to reduce these harmonics by design, in some cases additional harmonics are unavoidable.

* Please note that these noises are not a warrantable issue.

DNA4x4 on YouTube

Explore our builds, product videos and workshop updates. Watch DNA4x4 on YouTube.