
Xtreme Outback Stage 2 Heavy Duty Cushioned Ceramic Clutch Kit for Nissan Terrano, Nissan Patrol – 275mm
Availability: Usually in UK/EU stock£746.79 Incl. VAT (UK only)
Xtreme Outback Heavy Duty Cushioned Ceramic Clutch Kit for Nissan Terrano, Nissan Patrol. Disc diameter 275mm. Check the full engine, gearbox and conversion restrictions below.
Xtreme Outback heavy duty cushioned ceramic clutch kit for the vehicle and transmission variants listed below. The ceramic friction design is intended for demanding performance or motorsport use and can give a more abrupt engagement than an organic road clutch.
Technical specifications
| Brand | Xtreme Outback |
|---|---|
| Manufacturer part number | KNI28006-1C |
| Product | Clutch Kit |
| Stage | Stage 2 |
| Construction / duty | Heavy Duty; Cushioned Ceramic |
| Supplier-stated torque rating | 670 Nm |
| Supplier-stated clamping load | 1100Kg |
| Flywheel step (mm) | Flat |
| Clutch disc diameter (mm) | 275 |
| Disc spline count | 24 |
| Disc spline diameter (mm) | 25,4 |
| Clutch design | Single Plate Cushioned Ceramic Disc – combines extreme thermal durability with a cushioned segment design for improved driveability and smoother clutch take-off. |
| Flywheel compatibility / inclusion | Not included |
| Supplier shipping weight (kg) | 14.07 |
The clamping load describes the clutch pressure plate specification. It is not a vehicle payload, gross vehicle mass or towing rating.
Listed kit contents
- Pressure plate
- Clutch disc
- Release bearing
- Alignment tool
- Spigot bearing
- Bearing tool
Contents are application specific. Use the list above when checking flywheel, bearing and hydraulic requirements.
Motorsport use: Ceramic clutches prioritise heat and torque capacity. Confirm that the engagement characteristics suit the vehicle and its intended use.
Vehicle fitment
Fits only the variants and restrictions shown below. Model names and years alone are not enough: check the engine, gearbox, spline specification and any conversion requirements against the vehicle before ordering.
| Make | Model / series | Variant | Years | Engine / application detail | Gearbox / fitting restrictions |
|---|---|---|---|---|---|
| Nissan | Terrano / R20 | 3.0 DiTD 4WD | 1997.10-2004.12 | ZD30DDTi 2953 Diesel 125 kW 170 BHP (1997.10 – 2004.12) 275mm clutch. Some models uses smaller 260mm option., Suits vehicles manufactured until 07 / 2004. | |
| Nissan | Patrol / Y61 | 3.0 DTi | 2000.05- | ZD30DDTi 2953 Diesel 118 kW 160 BHP (2000.05 – ) , Suits vehicles manufactured until 07 / 2004. | |
| Nissan | Patrol / Y61 | 3.0 DTi | 2000.05- | ZD30DDTi 2953 Diesel 116 kW 158 BHP (2000.05 – ) , Suits vehicles manufactured until 07 / 2004. |
How to Bed-In a Clutch
Bedding-In a new clutch is vital to ensure that the clutch operates effectively and to help long-term durability.
Failure to correctly bed-in the new clutch can cause a wide range of clutch failures including shudder, therefore it is critical to take the time to complete this process.
TIPS FOR BEDDING-IN YOUR NEW CLUTCH
- Drive the Vehicle Gently for the first 1000 km
- Avoid Launching the Vehicle Aggressively
- Low RPM Engagements in Stop Start Traffic are Best for Bedding-In the Friction Material
CERAMIC MOTORSPORT APPLICATIONS
In Motorsport applications where street driving is not possible, it is important that a progressive degree of mechanical sympathy is used to assist with bedding-in the friction material to the steel surfaces. It is recommended that the friction point is modulated around a workshop and pit area at low engine RPM as much as possible. If the vehicle is being used in an event it is important to use warmup sessions to progressively increase the aggressiveness of driving. Being too aggressive with the clutch too soon after installation can cause slipping, localised thermal overloading and result in welding of the friction material.
DO YOU HAVE A SINGLE-MASS FLYWHEEL CONVERSION KIT?
When fitting a single mass flywheel replacement clutch package in certain vehicles, there may be an increase in transferred harmonic noises from the engine to the gearbox. This may present itself as increased rollover noise from the transmission at idle or increased harmonics in labouring conditions. These transmitted noises in no way effect the performance of the clutch or vehicle. Whilst every effort is made to reduce these harmonics by design, in some cases additional harmonics are unavoidable.
* Please note that these noises are not a warrantable issue.
DNA4x4 on YouTube
Explore our builds, product videos and workshop updates. Watch DNA4x4 on YouTube.
| Weight | 14.07 kg |
|---|---|
| brand | Xtreme Outback |
| clutch type | Clutch Kit |
| stage | Stage 2 |
| vehicle make | Nissan |
| vehicle model | Terrano, Patrol |
Items are usually dispatched within 2-3 business days delivery, but may take longer on custom made products. Delivery may take several weeks for products that aren't in UK or EU stock, but we will contact you with a delivery estimate if this applies to you, once you have ordered.




Reviews
There are no reviews yet.